Table Data:
Capacity | 2500M
Table area | 1500x350mm
Number of “T” shaped slots | 5-16H7
Distance between “T” shaped slots | 60mm
Rotary movement of table in both direction | 45º
Automatic longitudinal | 1150mm
Automatic cross | 400mm
Automatic vertical | 500mm
Available distance from spindle to overarm | 155mm
Housing of the taper spindle | ISO-40/50
Diameter of the main shaft nose | 88.88-128.57mm
Milling arbor diameter | 27mm
Number of speeds of the spindle | 12(40-1800) 50HZ
Longitudinal and cross feeds | 10-1208mm
Vertical feed | 5-604mm
"High Speed on axis rapid feed and tool changeover High performance by built-in motor-spindle 1000rpm (30kW) (40HP) High efficiency by rotary style APC and oversized linear guideways Dual screw chip removers"
"Attached to the front of the quick change cap, the seal blank can be cut to suit the size of bar required. The seal then reduces the potential for swarf and coolant to go down the spindle."
Type RLR 20A G9 Working Pressure 7.5bar Manufactured & Installed 2012 470Kg Made in Italy Stock No: 78836 Serial No: CA1549034 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospect...